|
|
Post by Precursor Customs on Dec 4, 2004 20:50:17 GMT -5
Here Is The Custom Support Center. If Anyone Has Questions On Customs They WIll Go Here
|
|
|
|
Post by Extreme on Dec 5, 2004 16:52:41 GMT -5
How do you paint red on black and stuff. It sounds like a dumb question but when I do it like doesn't come out. Its mostly clear with a little red maybe. Any tips?
|
|
|
|
Post by Precursor Customs on Dec 5, 2004 18:55:00 GMT -5
Use Bold Red Acrilyc Paint Like Apple Red And It Will Go Over Black. Go Over It Multiple Times To Get It To Go On Full Red.
~DT
Dominic Toretto For MOD
|
|
|
|
Post by Goreinator on Dec 23, 2004 14:10:33 GMT -5
Apply a base coat of white, then paint the red.
|
|
|
|
Post by HeartBreakMark on Jan 10, 2005 21:00:54 GMT -5
How would I add a beard to Ad10 HHH?
|
|
|
|
Post by Precursor Customs on Jan 12, 2005 21:52:57 GMT -5
Really All you need is sculpey which is a oven bake/Boil Clay Then Sculpt It TO The Way You Want It.
|
|
bcm77
Champion
Posts: 347
|
Post by bcm77 on Jan 13, 2005 3:46:19 GMT -5
What's the best way for splitting RA torsos without ruining them as I can do TTL and R3 ones OK but whenever I've tried an RA one I always end up making a mess of it. Any help would be appreciated.
|
|
|
|
Post by EUGENE on Jan 18, 2005 14:55:41 GMT -5
how do i swtch a RA style torso with another, RA style figure? and how do i swtch a RA style head with another, RA style figure?
|
|
xXnWoXx
Citizen
TWFN Customizing Champion
Posts: 18
|
Post by xXnWoXx on Jan 21, 2005 17:40:16 GMT -5
how do i swtch a RA style torso with another, RA style figure? and how do i swtch a RA style head with another, RA style figure? Head: The easiest way i've found to do this isnt with a screwdriver because it can mess up the torso. boil some hot water in a pot. when its boiling shut the flame off and stick the head and neck of the figure in the hot water for about 20 seconds. then just take it out and pull the head off with your hand. careful tho cuz the plastics off Torso: This is really never an easy thing to do but i think this approach works best. take a razor or exacto knife and cut down the seams of the torso on the side and top. cut it multiple times until the blade goes into the body. Be VERY careful though, i stress that. Then take a screwdriver and stick it in the neck. twist/jam the screwdriver down inside the torso. once its in there pry back and forth (front to back) until it pops open |
|
bcm77
Champion
Posts: 347
|
Post by bcm77 on Jan 27, 2005 14:16:34 GMT -5
What's the best way to get a professional quality finish when painting figures as on the few figures I've tried the paint ends up all lumpy looking.
|
|
|
|
Post by Precursor Customs on Jan 29, 2005 3:02:12 GMT -5
Take Your Time Paint Slowly And Smoothly.
|
|
|
|
Post by Reptile on Feb 3, 2005 1:18:54 GMT -5
What's the best way to get a professional quality finish when painting figures as on the few figures I've tried the paint ends up all lumpy looking. Justa tip- The best paint you can get is Polycarbonate spray paint. It goes on factory smooth and factory sturdy. Takes a lot of impact for it to scratch. You can find this at hobby shops I think its called Taimia or something for the brand name but just ask for Polycarbonate paint. If you want to use a brush you can but spray looks much better. The white paint on this is Polycarbonate.  |
|
|
|
Post by Precursor Customs on Feb 3, 2005 6:51:59 GMT -5
Nice Reptile You Should Post That Mordechai On Here It looks Good.
|
|
|
|
Post by Super Dragon on Feb 17, 2005 16:09:43 GMT -5
i want to seal figures what do i use
|
|
|
|
Post by Precursor Customs on Feb 18, 2005 22:58:57 GMT -5
Use Some Spray Sealer Or A Varnish Or You Could Use Hairspray The Spray Looks Best.
|
|
<--HuH?
